GZS1_KYN28_-12型鎧裝中置式金屬封閉開關設備
聲明：您必須遵守我們的協議，如果您下載了該資源行為將被視為對《電天下賬號管理規范》全部內容的認可，本網站資源來自原創，僅供用于學習和交流，請勿用于商業用途。如有侵權、不妥之處，請舉報本資源，我們將及時審核處理！
GZS1_KYN28_-12型鎧裝中置式金屬封閉開關設備
GZS1_KYN28_-12型鎧裝中置式金屬封閉開關設備
文本預覽
1 簡介 General
GZS1(KYN28)-12 型鎧裝中置式金屬封閉開關設備是由柜體和可移開部件兩大部分組
成。柜體的外殼和各功能單元的隔板均采用敷鋁鋅板制成，無焊接處理。外殼用五折邊
立柱，自攻螺釘連接而成。分隔成斷路器室、母線室、電纜室、繼電器儀表室。每一單
元獨立接地。
GZS1 (KYN28) -12 model sheathed in metal-enclosed switchgear mounted by the cabinet and remove the
parts of two parts. Cabinet shell and the functional unit of the partition are made using aluminum-zinc plate,
without welding process. Shell side with half of the amount column, self-tapping screw connection is made.
Remove the circuit breaker can be separated into a room, bus room, cable rooms, relay meter room.
Independent grounding for each unit.
可移開部件骨架采用鋼板彎制螺栓連接而成。根據用途可分為斷路器、隔離等二種可
移開部件。各類可移開部件的高度、深度統一，同類型同規格的可移開部件功能互換；
不同類型的可移開部件由于識別裝置的作用，使其不能互換。可移開部件在柜內有隔離、
試驗、工作三個位置，每一個位置均有定位裝置，以保證可移開部件處于其中一個位置
時不能移動。推或拉時，必須操作聯鎖機構，使斷路器在可移開部件移動前先行分閘。
Skeleton system can remove parts bolted steel plate bending made. Circuit breakers can be divided
according to purpose, two kinds of isolation can be removed parts. Various components can be removed
height, depth unity, the same type can be removed with the specifications of the functional parts exchange;
different types of identification devices may remove the components due to the role, so that it can not be
interchanged. Removable parts are isolated in the cabinet, test, work three positions, each position has a
positioning device to ensure that the parts can be removed in one position can not be moved. Push or pull
must actuator interlocking institutions, so that circuit breaker in the removed parts can be moved before the
first sub-gate.
Assembly code
Product
type
Diagram mark Weight Scale
Modified file
Mark Symbol Signatur e Date
number
Design 李謹淵 Standardization 劉翠芳 Page 1 A4
Check 李培康 Approved 李鴻儒
Verify 陳 寬 VEI LY electrotechnical ins titute
Processing 宋邦申 Date 2010.01GZS1型中置式開關柜 VS1、VD4手車式真空斷路器
GZS1 type middle-mounted switchgear VS1, VD4 barrow type vacuum circuit-breaker
GZS1型中置式開關柜
GZS1型中置式開關柜布置
GZS1 type middle-mounted switchgear
GZS1 type middle-mounted switchgear layout
Assembly code
Product
type
Diagram mark Weight Scale
Modified file
Mark Symbol Signatur e Date
number
Design 李謹淵 Standardization 劉翠芳 Page 2 A4
Check 李培康 Approved 李鴻儒
Verify 陳 寬 VEI LY electrotechnical ins titute
Processing 宋邦申 Date 2010.012 技術參數 Technical parameters
額定電壓 Rated voltage kV 12
1min工頻耐壓(有效值) kV
絕緣水平 Rated power-frequency withstand voltage (rms.) 42
Insulation level 雷電沖擊耐壓(峰值) kV
75
Rated lightening impulse withstand voltage(peak.)
額定頻率 Rated frequency Hz 50
主母線額定電流 Rated main bus current A 630,1250,1600,2000,2500,3150,4000*,5000*
分支母線額定電流 Rated branching bus current A 630,1250,1600,2000,2500,3150,4000
4秒熱穩定電流(有效值) 4s short-time withstand current(rms.) kA
16,20,25,31.5,40**,50**
額定動穩定電流(峰值) *** Peak withstand current(peak.) *** kA
40,50,63,80,100,125
* 需裝備通風裝置 * with forced ventilation.
** 40 kA為3秒 ** 3 second for 40kA
*** 儀用互感器的短路容量應單獨考慮
*** The short-circuit capability of transformer for measure should be considered by oneself.
Assembly code
Product
type
Diagram mark Weight Scale
Modified file
Mark Symbol Signatur e Date
number
Design 李謹淵 Standardization 劉翠芳 Page 3 A4
Check 李培康 Approved 李鴻儒
Verify 陳 寬 VEI LY electrotechnical ins titute
Processing 宋邦申 Date 2010.013 結構 Structure
A – 母線隔室 Busbar compartment
B – 斷路器隔室 Circuit breaker compartment
C – 電纜隔室 Cable compartment
D – 儀表、繼電器隔室 Meters, relays compartment
1 – 母線 Bus bar
2 – 靜觸頭裝置 Static contact device
3 – 真空斷路器 Vacuum breaker
4 – 接地閘刀 Ground Knife
5 – 電流互感器 Current Transformer
6 – 支柱絕緣子 Insulators GZS1型中置式開關柜
7 – 電壓抽取裝置 Voltage extraction device GZS1 type switch mounted
in tAhes sceambibnleyt code
Product
type
Diagram mark Weight Scale
Modified file
Mark Symbol Signatur e Date
number
Design 李謹淵 Standardization 劉翠芳 Page 4 A4
Check 李培康 Approved 李鴻儒
Verify 陳 寬 VEI LY electrotechnical ins titute
Processing 宋邦申 Date 2010.014 外形尺寸 Dimension
GZS1(KYN28)-12 型鎧裝中置式金屬封閉開關設備是由柜體和可移開部件兩大部分組
成。柜體的外殼和各功能單元的隔板均采用敷鋁鋅板制成，無焊接處理。外殼用五折邊
立柱，自攻螺釘連接而成。分隔成斷路器室、母線室、電纜室、繼電器儀表室。每一單
元獨立接地。
GZS1 (KYN28) -12 model sheathed in metal-enclosed switchgear mounted by the cabinet and remove the
parts of two parts. Cabinet shell and the functional unit of the partition are made using aluminum-zinc plate,
without welding process. Shell side with half of the amount column, self-tapping screw connection is made.
Remove the circuit breaker can be separated into a room, bus room, cable rooms, relay meter room.
Independent grounding for each unit.
可移開部件骨架采用鋼板彎制螺栓連接而成。根據用途可分為斷路器、隔離等二種可
移開部件。各類可移開部件的高度、深度統一，同類型同規格的可移開部件功能互換；
不同類型的可移開部件由于識別裝置的作用，使其不能互換。可移開部件在柜內有隔離、
試驗、工作三個位置，每一個位置均有定位裝置，以保證可移開部件處于其中一個位置
時不能移動。推或拉時，必須操作聯鎖機構，使斷路器在可移開部件移動前先行分閘。
Skeleton system can remove parts bolted steel plate bending made. Circuit breakers can be divided
according to purpose, two kinds of isolation can be removed parts. Various components can be removed
height, depth unity, the same type can be removed with the specifications of the functional parts exchange;
different types of identification devices may remove the components due to the role, so that it can not be
interchanged. Removable parts are isolated in the cabinet, test, work three positions, each position has a
positioning device to ensure that the parts can be removed in one position can not be moved. Push or pull
must actuator interlocking institutions, so that circuit breaker in the removed parts can be moved before the
first sub-gate.
Assembly code
Product
type
Diagram mark Weight Scale
Modified file
Mark Symbol Signatur e Date
number
Design 李謹淵 Standardization 劉翠芳 Page 1 A4
Check 李培康 Approved 李鴻儒
Verify 陳 寬 VEI LY electrotechnical ins titute
Processing 宋邦申 Date 2010.01GZS1型中置式開關柜 VS1、VD4手車式真空斷路器
GZS1 type middle-mounted switchgear VS1, VD4 barrow type vacuum circuit-breaker
GZS1型中置式開關柜
GZS1型中置式開關柜布置
GZS1 type middle-mounted switchgear
GZS1 type middle-mounted switchgear layout
Assembly code
Product
type
Diagram mark Weight Scale
Modified file
Mark Symbol Signatur e Date
number
Design 李謹淵 Standardization 劉翠芳 Page 2 A4
Check 李培康 Approved 李鴻儒
Verify 陳 寬 VEI LY electrotechnical ins titute
Processing 宋邦申 Date 2010.012 技術參數 Technical parameters
額定電壓 Rated voltage kV 12
1min工頻耐壓(有效值) kV
絕緣水平 Rated power-frequency withstand voltage (rms.) 42
Insulation level 雷電沖擊耐壓(峰值) kV
75
Rated lightening impulse withstand voltage(peak.)
額定頻率 Rated frequency Hz 50
主母線額定電流 Rated main bus current A 630,1250,1600,2000,2500,3150,4000*,5000*
分支母線額定電流 Rated branching bus current A 630,1250,1600,2000,2500,3150,4000
4秒熱穩定電流(有效值) 4s short-time withstand current(rms.) kA
16,20,25,31.5,40**,50**
額定動穩定電流(峰值) *** Peak withstand current(peak.) *** kA
40,50,63,80,100,125
* 需裝備通風裝置 * with forced ventilation.
** 40 kA為3秒 ** 3 second for 40kA
*** 儀用互感器的短路容量應單獨考慮
*** The short-circuit capability of transformer for measure should be considered by oneself.
Assembly code
Product
type
Diagram mark Weight Scale
Modified file
Mark Symbol Signatur e Date
number
Design 李謹淵 Standardization 劉翠芳 Page 3 A4
Check 李培康 Approved 李鴻儒
Verify 陳 寬 VEI LY electrotechnical ins titute
Processing 宋邦申 Date 2010.013 結構 Structure
A – 母線隔室 Busbar compartment
B – 斷路器隔室 Circuit breaker compartment
C – 電纜隔室 Cable compartment
D – 儀表、繼電器隔室 Meters, relays compartment
1 – 母線 Bus bar
2 – 靜觸頭裝置 Static contact device
3 – 真空斷路器 Vacuum breaker
4 – 接地閘刀 Ground Knife
5 – 電流互感器 Current Transformer
6 – 支柱絕緣子 Insulators GZS1型中置式開關柜
7 – 電壓抽取裝置 Voltage extraction device GZS1 type switch mounted
in tAhes sceambibnleyt code
Product
type
Diagram mark Weight Scale
Modified file
Mark Symbol Signatur e Date
number
Design 李謹淵 Standardization 劉翠芳 Page 4 A4
Check 李培康 Approved 李鴻儒
Verify 陳 寬 VEI LY electrotechnical ins titute
Processing 宋邦申 Date 2010.014 外形尺寸 Dimension
AIGC您好，GZS1_KYN28_-12型鎧裝中置式金屬封閉開關設備是一種常見的高壓電氣設備。讓我為您詳細解釋一下：
1. **GZS1**: 這部分通常代表設備的型號或系列，可能是制造廠商為該產品指定的代碼，用于區分不同的產品系列。
2. **KYN28**: KYN是德語Kurzschlu?schutz（短路保護）和Nahunterbreiter（近旁擴展）的縮寫，這是一種廣泛應用于電力系統的中置式開關柜（Metal-enclosed switchgear），設計用于提供安全可靠的電力分配和保護。
3. **-12**: 這個數字可能表示開關柜的額定電壓等級，即12kV（千伏），這是高壓開關設備常見的電壓等級之一，適用于電力系統中的中壓應用。
4. **鎧裝**：意味著該開關柜采用金屬鎧裝，提供了額外的防護，防止外部環境對內部設備的影響，如防塵、防潮和防機械損傷。
5. **中置式**：開關柜的斷路器和其他主要元件位于開關柜的中部，便于維護和更換。
總的來說，GZS1_KYN28_-12型開關設備是一款高壓、防護性強、中置結構的開關柜，適用于工業和電力系統中對安全性要求較高的場合。如果您有關于這個設備的特定問題或者需要更多信息，請隨時告訴我。
